Linispeed Jack Major Specifications

Basic Package

Stroke	Allowable Thrust kN	Screw OD mm	Screw Root Dia. mm	Screw lead mm	Start-up efficiency %	Worm Reduction Ratio
800	30	36	30.7	25	65	6

Idling torque without load N･m	Holding Torque N･m	Allowable Torque on Input Shaft N･m	Screw Travel per Turn of Input Shaft mm	Maximum Input Speed r/min	Screw shaft rotation torque during allowable thrust N･m	Moment of Inertia on Input Shaft ×10-4kg・m2
6	11.5	65	4.17	3000	133	9.01

Table of Dimensions

XA mm		L mm	Estimated Mass kg
MIN	MAX
202	1002	878	39

Transmission Capacity Table

With Linispeed Jacks, efficiency and input capacity/input torque differ from each input rotation speed.
Please confirm the input rotation speed value that you will use.

Input speed r/min	Speed mm/s	Total Efficiency %	Input Capacity Required for Allowable Thrust kW	Input Torque Required for Allowable Thrust N･m (Note 1 )
3000	208	87	9.0	28.8
2500	174	87	7.6	29.2
2000	139	87	6.1	29.0
1500	104	87	4.5	28.9
1000	69	85	3.1	29.5
500	35	83	1.6	30.1
100	7	78	0.33	31.7

Note 1 ) Includes Idling torque without load.
Note 2 ) If the input rotation speed is always 200r / min or less, trouble may occur inside the unit, so please contact us.

Allowable percentage duty cycle

Use Linispeed Jack below the 90 ºC temperature of the reducer surface, including ambient temperatures.
The following table provides guidelines for load rates (% ED) for reducer surface temperatures below 90 ºC *This value is not a guaranteed value. Confirm the temperatures of the reducer surface when actually using Linispeed Jacks.

Ambient Temperature 　20ﾟC	Ambient Temperature 　30ﾟC	Ambient Temperature 　40ﾟC
[Click to enlarge ]	[Click to enlarge ]	[Click to enlarge ]