1 November 20052 NDIA Targets Symposium The Frequency Agile System  The Frequency Agile System Provides A New Concept for Naval Target Control:  Senses.

Presentation on theme: "1 November 20052 NDIA Targets Symposium The Frequency Agile System  The Frequency Agile System Provides A New Concept for Naval Target Control:  Senses."— Presentation transcript:

1

2 1 November 20052 NDIA Targets Symposium The Frequency Agile System  The Frequency Agile System Provides A New Concept for Naval Target Control:  Senses RF Interference or Multipathing and Automatically Changes Frequencies To Avoid It  Provides Multiple High-Speed RF Networks For Complex Target Operations  Compatible With Existing Ground Systems, Such As the System for Naval Target Control (SNTC)

3 1 November 20053 NDIA Targets Symposium Components Of The Frequency Agile System (FAS) FAS Ground RF Unit* FAS Transponders RF Data Link 19 Channels 421.5 MHz to 448.5 MHz FAS Test Set* FAS Airborne Relay* *Photographs Provide Conceptual Illustrations Of Anticipated FAS Equipment To Ground Control System Omni-Directional Antenna

4 1 November 20054 NDIA Targets Symposium 1.FAS Provides 200 NM Line Of Sight Distance with 12 dB of Margin 330 NM Over The Horizon With One Relay Hop (Standard) 730 NM Over The Horizon With Two Relay Hops (Optional) Relay Track Information Is Provided By The Data Link 2.46 16-Bit Words Are Provided In Each Uplink/Downlink Message Includes Time, Space, Position Information (TSPI) 9 Times More Data Than The Current SNTC, Similar To GRDCS 3.Selectable Uplink/Downlink Rates Each Participant Can Have Its Own Uplink/Downlink Rate Selectable From 1 Hz, 5 Hz, 10 Hz or 15 Hz Uplink/Downlink Rates Remain Fixed During The Mission FAS Facts

5 1 November 20055 NDIA Targets Symposium 4.Can Operate With 1 to 4 RF Networks Simultaneously Example: One RF Network Could Be Used for Subscale Operations, One for Full Scale Operations, and One for Maintenance Operations 5. A Migration Path Is Provided To Satellite Command & Control Iridium Satellite Module Is A Pre-Planned Product Improvement (P 3 I) Electrical & Mechanical Interfaces Provided On All FAS Transponders 6.Can Operate In GPS-Denied Environments Selective Availability Anti-Spoofing Module (SAASM) Is A P 3 I Electrical & Mechanical Interfaces Provided On All FAS Transponders If L2 Band Is Also Denied, TSPI Can Be Obtained From External INS More FAS Facts

6 1 November 20056 NDIA Targets Symposium FAS Transponder Optional Iridium Module Optional SAASM Module FAS Transponder System

7 1 November 20057 NDIA Targets Symposium FAS can operate independently of any range or can be integrated with other range systems, such as GRDCS. This figure illustrates how the FAS could be installed and operated with GRDCS while maintaining the existing 915 MHz data link. The Frequency Agile System Is Portable

8 1 November 20058 NDIA Targets Symposium Goals Of The Frequency Agile System The Frequency Agile System Was Conceived During A Study Commissioned By Navy PMA-208 To Address The Following Goals For The System for Naval Target Control: 1.Improved Resistance To Interference 2.Increased Data Link Reliability 3.Higher Data Throughput For All Targets 4.Support for Complex Mission Scenarios 5.Low Implementation Risk 6.Low Implementation Cost

9 1 November 20059 NDIA Targets Symposium GOAL 1: Improved Resistance To Interference SNTC’s 435 MHz to 450 MHz Band Is Shared E-2C Surveillance Radars, Amateur Radio Operators, Flight Termination Systems and EPLRS/SADL Each Of These Systems Can Interfere With SNTC Effective Command/Telemetry Rate Can Be Affected Can Even Stop In The Presence Of Strong Interference Can Lead To Aborted Missions SNTC Frequency Cannot Be Changed After Launch If Interference Starts, There’s Nothing The SNTC Operator Can Do One Workaround: Operate On Known “Quiet” Channels Only But This Limits System Capabilities

10 1 November 200510 NDIA Targets Symposium Example Of Interference From E-2C An E-2C Approaches Tx/Rx Frequency: 439.5 MHzNew Tx/Rx Frequency: 429.5 MHz Frequency Agile System Ground RF Unit and Antenna

11 1 November 200511 NDIA Targets Symposium FAS Frequency Scanners Each FAS Radio Has It’s Own Frequency Scanner Each Scanner “Listens” To Each Unused Channel Quiet Channels Are Marked As Available The Ground System Collects Channel Data From All Transponders and Determines The Best Alternate Frequencies

12 1 November 200512 NDIA Targets Symposium The Concept Of Frequency Agility  The Frequency Agile System Is Not A Frequency Hopper It Operates On A Single Frequency Unless Forced To Switch Will Not Normally Switch Frequencies During Operation Requires Severe Interference, Multipathing, or User Command  FAS Will Not Switch Into Another Problem Area Only Switches To Pre-Scanned “Quiet” Frequencies  Won’t Switch To An Unapproved Frequency Any Of The FAS Frequencies Can Be Blocked By Local Operators Will Not Create Problems For Other Systems  Exploits Unused Frequencies As They Become Available Most RF Systems Turn On and Off Throughout The Day FAS Will Detect These Frequencies As They Become Available

13 1 November 200513 NDIA Targets Symposium Resistance To Multipathing

14 1 November 200514 NDIA Targets Symposium How FAS Avoids Multipathing The Frequency Agile System Detects Multipathing Two Ways: RF Signal Degradation (Rayleigh Fading) Multiple Data Errors With Strong RF Signal (Delay Spreading) If Any Radio Detects Either Condition, The System Will Switch To An Alternate Frequency Multipathing Is Very Sensitive To Frequency Small Frequency Changes (~10 MHz) Are Very Effective

15 1 November 200515 NDIA Targets Symposium GOAL 2: Increased Data Link Reliability SNTC Typically Operates Between 80% and 100% TQUAL 100% TQUAL = No Missed Messages 80% TQUAL = 20 Out Of Every 100 Downlink Messages Are Lost Lost Messages Are Highly Undesirable for T&E Command Dropouts Can Cause Jerky Stick Response Telemetry Dropouts Can Result In Over-Driving The Target T&E, Weapons Developers, and Engineering Investigations Require All Possible TM Data For Post Mission Analyses FAS Is Designed for TQUAL  99% With 12 dB Margin Any Scenario, Any Target Designed For 12 dB Of Margin At Max Distance 200 NM Max Distance With Standard Omni-Directional Antennas 250 NM Max Distance With Semi-Directional Panel Antennas

16 1 November 200516 NDIA Targets Symposium GOAL 3: Higher Data Throughput Maximum SNTC Data Throughput (Current System): 10 Hz Uplink/Downlink Message Rate Maximum Rate In Direct Line Of Sight Mode 48 Data Bits Per Uplink, 120 Data Bits Per Downlink Throughput = (48 + 120) * 10 = 1,680 Data Bits Per Second Maximum Data Throughput For SNTC With FAS: 15 Hz Uplink/Downlink Message Rate Same In Direct Line of Sight OR Relay Mode 512 Data Bits In Each Uplink and Downlink Message Throughput = (512 + 512) * 15 = 15,360 Data Bits Per Second SNTC With FAS Can Provide Full Scale Target Control

17 1 November 200517 NDIA Targets Symposium GOAL 4: Support For Complex Mission Scenarios Maximum Capabilities For SNTC With FAS: 8 Targets Per Frequency At 10 Hz Rate Within Line Of Sight 4 Targets Per Frequency At 10 Hz Rate With Airborne Relay 40 Surface Targets Per Frequency At 1 Hz Rate, Relay or LOS Maximum of 4 Frequency Groups Per System Therefore, SNTC With FAS Can Control Up To: 32 Subscales or Full Scales In Line Of Sight At 10 Hz Or Up To 16 Subscales or Full Scales Through A Relay Or Up To 160 Surface Targets Through A Relay at 1 Hz FAS Also Allows Mixed Modes of Target Types, Relays, and Uplink/Downlink Rates Thousands of Scenarios Possible

18 1 November 200518 NDIA Targets Symposium Example Scenario With One RF Network

19 1 November 200519 NDIA Targets Symposium GOAL 5: Low Implementation Risk FAS Exploits SNTC’s “Plug ‘n Play” System Architecture Plugs Directly Into The SNTC LAN Installing FAS On Existing SNTC Systems Will Not Cause Down-Time Can Be Used In Combination With Existing UHF Data Link Or Stand-Alone SNTC with UHF & FAS Data Links

20 1 November 200520 NDIA Targets Symposium Reuse of Existing Designs Major Radio Subassemblies Have Been Previously Developed On The Navy’s Early Success Data Link (ESDL) MSTCS Program Same Radio Is Used On FAS Transponder, GRFU, Relay & Test Set All ESDL Subassemblies Have Already Been Qualified for Temperature, EMI, Vibration, Shock, Altitude, etc. FAS Transponder Block Diagram

21 1 November 200521 NDIA Targets Symposium Established Modulation Technique Like ESDL, FAS Uses Gaussian Minimum Shift Keying (GMSK) Very Efficient Spectrum Usage -- Similar To SOQPSK FAS Transmit Spectrum Shown With 265 kbps Burst Data Rate

22 1 November 200522 NDIA Targets Symposium Other Technical Details Forward Error Correction (FEC) Detects and Corrects Errors In The Uplink and Downlink Data IEEE 802.16a Turbo Product Codes Used For Best Efficiency 24-Bit Cyclic Redundancy Check (CRC) Prevents Any Possibility of Erroneous Commands or Telemetry Standard TCP/IP (Ethernet) Polynomial Multiple Transponder Interfaces ITCS (Legacy), CDA (CANBus), and SDLC (Synchronous RS-422) Low Power Consumption 38 Watts, Average Transponder Power

23 1 November 200523 NDIA Targets Symposium Frequency Allocation DD Form 1494, Request for Authorization, Submitted December, 2004 Note G8 Of The NTIA Redbook, January 2005 States: “Low Power Government Radio Control Operations Are Permitted In The Band 420 – 450 MHz” The Navy Marine Corps Spectrum Center (NMSC) Stated Earlier: “We see no reason that this proposed modification [to SNTC] should not be approved. Particularly since it will help avoid interference situations” NMSC Has Indicated That The Frequency Authorization (J/F 12) Will Most Likely Be Approved In Early 2006

24 1 November 200524 NDIA Targets Symposium GOAL 6: Low Implementation Cost No New Transponder Mounting Requirements For Existing Targets Reduced Ground Equipment Requirements Fewer FAS GRFUs Are Needed For The Same Mission Requirements FAS Uses Same Antennas and RF Cabling As SNTC No New Ground or Target Antenna Installations Are Required No Hardware Changes Required To SNTC Consoles All FAS Ground System Functions Are Implemented In Software Navy Does Not Lose Its Original Investment In SNTC Equipment Target Design To Production Cost: Same As or Less Than Current SNTC Transponder Same As or Less Than Current SNTC GRFU

25 1 November 200525 NDIA Targets Symposium Summary ParameterCurrent SNTCSNTC With FAS Frequency Band435 – 450 MHz420 – 450 MHz Resistance To InterferenceNo Built-In ResistanceExcellent Resistance To MultipathingNo Built-In ResistanceExcellent Uplink/Downlink Message Rate4 Hz to 10 Hz, depending on mission configuration 1 Hz, 5 Hz, 10 Hz, or 15 Hz, user defined Data Link Reliability80% to 100%, typical99% to 100%, typical Data Throughput1,680 data bits per second15,360 data bits per second Maximum Number Of Subscale Targets8 in LOS Mode @ 7 Hz 8 in Relay Mode @ 4 Hz 32 in LOS Mode @ 10 Hz 16 in Relay Mode @ 10 Hz Maximum Number Of Full Scale TargetsNot Supported32 in LOS Mode @ 10 Hz 16 in Relay Mode @ 10 Hz Maximum Number Of Surface Targets32 at 1 Hz, any mode256 in LOS Mode @ 1 Hz 160 in Relay Mode @ 1 Hz Target InterfaceITCS Bus OnlyITCS, CAN, or RS-422 Bus Automatic Data Error CorrectionNoneTurbo Product Code FEC Data Integrity Checking8-Bit Checksum24-Bit Cyclic Redundancy Check