ZKTECO SpeedFace-V4L Pro Series Support Video Intercom Device
Specifications
- Product Name: SpeedFace-V4L Pro Series
- Version: 1.0
Installation Environment Recommendations
- Install indoors only
- Avoid installation near glass windows
- Avoid direct sunlight and exposure
- Avoid use of any heat source near the device
- Avoid direct contact with sunlight for extended periods
- Protect the device from moisture, water, and rain
- Handle the device with care
- Avoid installation near the sea or in locations prone to metal oxidation and rust
- Protect the device from lightning
- Ensure the device only operates briefly in acidic or alkaline environments
How to Install the Device on the Wall?
- Stick the wall-mounting template to the wall and drill holes according to the template.
- Insert the expansion tubes into the mounting holes.
- Attach the backplate to the wall using mounting screws. Remember to insert the wire through the backplate before installation.
- Attach the terminal to the backplate and secure it with a security screw.
Door Bell, Exit Button, and Alarm Connection
Refer to the provided diagram for proper connections of exit button, doorbell, and alarm.
Power Connection
Connect the power supply with higher current ratings to the designated terminals for power connection.
RS485 and Wiegand Connection
Connect RS485 and Wiegand devices according to the provided diagram for proper communication.
Ethernet Connection
- Connect the device to Ethernet using the provided RJ45 port.
- Configure IP address and subnet mask as necessary.
Lock Relay Connection
Refer to the instructions for connecting NO Lock and NC Lock based on power sharing configuration with the lock.
Download Center
Scan the QR Code provided to download User Manual, Installation Guide, and Quick Start Guide.
Contact Information
- ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town,
- Dongguan, China
- Phone: +86 769 – 82109991
- Fax: +86 755 – 89602394
- Website: www.zkteco.com
FAQ
- Q: Can I install the SpeedFace-V4L Pro Series outdoors?
A: No, it is recommended to install the device indoors only to ensure optimal performance and longevity. - Q: How do I configure the IP address for Ethernet connection?
A: Navigate to COMM. > Ethernet > IP Address on the device, input the desired IP address, and click OK to apply the changes. - Q: What is the default IP address for the device?
A: The default IP address is 192.168.1.201.
Installation Guide
- SpeedFace-V4L Pro Series
- Version: 1.0
- Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
Installation Environment
Please refer to the following recommendations for installation:
- Avoid direct contact to sunlight for a long time.
- Protect the device from moisture, water, and rain.
- Handle the device with care.
- Ensure that the device is not installed near the sea or in other locations where metal oxidation and rust may develop if the device is exposed for an extended period.
- Protect the device from lightning.
- Ensure that the device only works in an acidic or alkaline environment briefly.
How to Install the Device on the wall?
- Step 1: Stick the wall-mounting template to the wall and drill holes according to the wall-mounting template.
- Step 2: Insert the expansion tubes into the mounting holes.
- Step 3: Attach the backplate on the wall using the wall mounting screws.
Note: Please insert the wire through the backplate before installation.
- Step 4: Attach the terminal to the backplate.
- Step 5: Attach the terminal to the backplate with a security screw.
Door Sensor and Smoke Detection Connection
Power Connection
Recommended Power Supply:
- 12V ± 10%, at least 3000mA.
- To share the power with other devices, use a power supply with higher current ratings.
RS485 and Wiegand Connection
Ethernet Connection
Click COMM. > Ethernet > IP Address on the device, input the IP address and click OK.
Lock Relay Connection
- The system supports Normally Opened Lock and Normally Closed Lock.
- The NO LOCK (normally opened at power on) is connected with “NO1” and “COM” terminals, and the NC LOCK (normally closed at power on) is connected with “NC1” and “COM” terminals. Take NC Lock as an example below:
Download Center
Scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide.
QR Code (Download Center)
- ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
- Phone : +86 769 – 82109991
- Fax : +86 755 – 89602394
- www.zkteco.com
Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.
Documents / Resources
 |
ZKTECO SpeedFace-V4L Pro Series Support Video Intercom Device [pdf] Installation Guide SpeedFace-V4L Pro Series Support Video Intercom Device, SpeedFace-V4L Pro Series, Support Video Intercom Device, Video Intercom Device, Intercom Device, Device |
ZKTeco | Biometrics and Computer Vision 
